Hot water is a vital aspect
of modern life. Both businesses and homes use hot water for doing many
essential tasks. But, it seems that people usually neglect this component until
the hot water in the Brisbane plumbing system stops functioning. The good news is there
are some steps to take to keep the hot water system in top condition for a long
time.
Here are some things you
need to do:
Determine the System Type
You need to know whether the
problem is a continuous flow system or with a tank system. Since a continuous
flow system does not store any hot water, they need less maintenance to work
properly. When it comes to using a hot water system and a water tank, they need
more maintenance regularly.
Check the Temperature and Pressure Relief Valve
The TPR valve works to
maintain the correct level of temperature pressure inside your tank. If the
pressure fluctuates, it can put unwanted strain on your interior tank,
gradually weakening its structure. This results in cracks and other damages.
Check if your TPR valve is running smoothly or there are some indications that
it requires maintenance.
You need to change the valve
if there are leaks in the area surrounding it. If the valve is not running
continuously and there is no leakage in the area, it is still not a guarantee
that it functions correctly. Make sure to check your valve about every six
months.
Be Extra Careful With Gardening Work Near the System
If the Brisbane plumbing system is on
a grass area close to your house, you need to be careful when doing garden maintenance.
For example, heavy bumps from a mower can bring about dents or cracks. Make
sure to take special care when working within the area.
Turn off the Tank System When Going Away for a While
If the entire family is
going away for a week or so, there is no need to switch off the tank system.
However, if you are leaving longer, then it is best to turn the tank of the hot
water system off. This is because the Brisbane plumbing system will keep on heating your
water, even though nobody is using it. Switching it off whenever necessary can
extend the life of the system, as well as, help save you in electricity or gas.
Change the Sacrificial Anode
The sacrificial anode hangs
down inside the hot water tank. It is a metal rod that is typically made of
magnesium or aluminum that comes with a zinc coating. These metal rods attract
impurities such as minerals in the water that may cause your tank of the
plumbing system to rust. By putting the sacrificial anode properly, it can rust
instead of your tank. But over time, the sacrificial anode tends to
deteriorate. You need to replace it periodically as a way to protect your tank.
Get Annual Professional Services
Do not wait until there is
an issue in your plumbing, as this could be a costly affair. Contact your local
plumber to look into your system at least once a year. A professional can
pinpoint any potential problems before they become serious problems and ensure
your system is running well.
No comments:
Post a Comment